The Ax60+ is a fixed, wall-mounted multi-gas monitor for detecting carbon dioxide (CO₂) with an option for monitoring oxygen (O₂) depletion and enrichment. Suitable for use in breweries, wineries, bars, pub cellars and walk-in coolers, fast food restaurants, stadiums, shopping malls, and theatres, or anywhere gas is being used for beverage carbonation or transporting drinks from keg to draft towers and dispensers.
Select your required spares & accessories for your Analox Ax60+ below:
|2535-0159-0001||AX60+ Waterproof Quick Connect+ Coupler|
The RJ45 waterproof Quick Connect+ Coupler allows the connection of Sensors, Alarms, DOM’s and Beacons as part of the AX60+ Platform to a CDU, or by daisy chaining other devices.
|2535-0159-0002||AX60+ Waterproof Quick Connect+ Splitter|
The RJ45 waterproof Quick Connect+ Splitter allows the connection of Sensors, Alarms, DOM’s and Beacons as part of the AX60+ Platform to a CDU, or by daisy chaining other devices.
Blue Strobe inc. cable
Red Strobe inc. cable
White Strobe inc. cable
Amber Strobe inc. cable
|AX60SAQYA||CO₂ Sensor for Fixed Monitor Ax60+|
The Ax60+ CO₂ sensor is connected by quick connect cable to the Ax60+ Central Unit and is set by default to trigger a low-level alarm at 1.5% CO₂, an evacuation alarm at 3% CO₂ and a Time-Weighted Average (TWA) alarm of 0.5% CO₂ measured over eight hours.
|AX60SCQYA||O₂ Sensor for Fixed Ax60+ monitor|
The Ax60+ O2 Sensor provides an early warning of both oxygen depletion and oxygen enrichment. The sensor unit should be connected to the Central Unit by quick connect cable and is set by default to trigger low-going alarms at both 19.5% and at 18% and a high-going alarm at 23%.
|8000-9008||Ax60+ Splashguard for Sensor|
To protect the sensors we recommend purchasing a splashguard protector to cover the sensor, shielding it from accidental splashes while cleaning is in operation.
|P0159-4305K||Ax60+ Sensor Protector Kit|
The Sensor Protector Kit includes a Protector Bar, Fixing Kit and Splashguard. The Protector Bar should be placed over the sensor, and secured in place using the fixing kit, to protect it from being damaged by other equipment being moved around in the same area.